Iphethini yesando esekwe emanzini uchungechunge lukathayela lwephethini elolintshi

Iphethini yesando esisekelwe emanzini sikathayela wephethini ewolintshi yochungechunge Isithombe esifakiwe

incazelo emfushane:

Lolu chungechunge lwemikhiqizo luklanyelwe ngokukhethekile imishini nemishini.I-primer yenziwe ngopende we-epoxy resin osekelwe emanzini, futhi i-topcoat yenziwe ngopende we-epoxy resin osekelwe emanzini noma i-polyurethane topcoat.Ijazi langaphezulu linomphumela wephethini eliwolintshi elizwakala isando.
Ukusebenza okufanayo
Ukumelana nokushisa okuphezulu nokuphansi kokushintshana kokushisa nokubanda, ukumelana nokuguga, ukumelana nowoyela, ukumelana namakhemikhali;
Ukumelana nokuphuzi, ubulukhuni obuphezulu, i-gloss enhle, futhi ingelashwa ngaphandle isikhathi eside ngaphandle kokushintsha umbala kanye nempushana;
Umthelela wephethini yesando sikathayela usobala futhi unezinhlangothi ezintathu.

Thumela i-imeyili kithi

Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Ububanzi besicelo

Ifanele ukumbozwa kwangaphandle kwemishini yensimbi ehlukahlukene yasendlini nangaphandle, futhi isetshenziselwa ngokukhethekile ukuvikela ukugqwala nokuhlobisa izindawo zensimbi ezifana nemishini nemishini kagesi, izindiza, izinsimbi, amafeni kagesi, amathoyizi, amabhayisikili, nezingxenye zezimoto.

ukwelashwa kwendawo

Uchungechunge lwephethini yesando esekelwe emanzini lukathayela lwephethini ewolintshi (4)

Zonke izindawo ezizogcotshwa kufanele zingabi nawoyela nothuli, futhi kufanele zigcinwe zihlanzekile, zomile, futhi zingangcoli.Ifilimu yokupenda endala kufanele ichithwe ngokuphelele yi-thinner, futhi ama-primers ne-putty akufanele afuthwe ukuze amboze.Zonke izindawo kufanele zihlolwe futhi ziphathwe ngokuvumelana ne-ISO8504:1992.

Imiyalo Yokwakha

(1) Ukugqoka kufanele kuxutshwe ngokugcwele futhi kuxutshwe ngokulinganayo;ama-ejenti okwelapha angaphansi nangaphezulu kufanele asetshenziswe ngendlela efanele futhi ingxenye kufanele ibe nenembile;
(2) Upende oyimishini udinga ukujiya kwefilimu yesikhathi esisodwa.Ukuze uthole isicwebezelisi esingcono, kungcono ukusebenzisa uhlobo olungenamoya olusizwa umoya olune-atomization ekahle.
fafaza, noma udinga izifutho eziningi.
(3) Ifilimu kapende ingomiswa ngokwayo noma ekushiseni okuphansi, ubulukhuni befilimu kapende omisiwe buphakeme, futhi umphumela wephethini yesando eboshiwe ungcono;
(4) I-epoxy noma i-polyurethane ingakhethelwa okokusebenza kwangaphakathi, futhi i-polyurethane kufanele isetshenziselwe okokusebenza kwangaphandle;
(5) Ngemva kokufafaza, amathuluzi kufanele ahlanzwe nge-diluent ngesikhathi, ngaphandle kwalokho isibhamu sokufutha ngeke sisakwazi ukusetshenziswa.

Iphakheji enconyiwe

I-Primer FL-213D/I-epoxy primer esekwe emanzini isikhathi esingu-1
I-Topcoat i-FL-133M ye-polyurethane topcoat esekelwe emanzini (iphethini kathayela/isando/iphethini ewolintshi)/213M ijazi le-epoxy elisuselwa emanzini (iphethini likathayela/isando/iphethini ewolintshi) izikhathi ezingu-1-2, ukujiya okuhambisanayo abukho ngaphansi kuka-150um.
Izinga eliphezulu: HG/T5176-2017

Ukusekela imingcele yezobuchwepheshe yokwakha

Ukucwebezela	I-gloss ephezulu (ijazi eliphezulu)
Umbala	bhekisa ekhadini lombala wesihlahla se-wind chime noma ngokuya ngesampula
Ivolumu yokuqukethwe okuqinile	40%±2
Isilinganiso sokuhlanganisa ithiyori	8m²/L (ifilimu eyomile engama-microns angu-50)
Amandla adonsela phansi athize	primer 1.3kg/L, topcoat 1.15kg/L
Indawo eyomile (umswakama ongu-50%)	15℃≤2h, 25℃≤1h, 35℃≤0.5h
Ukusebenza kanzima (umswakama 50%)	15℃≤12h, 25℃≤8h, 35℃≤5h
Isikhathi sokuvuselela	okunconyiwe okungenani amahora angama-24;okuphezulu okungenamkhawulo (25℃)
Ukwelashwa okuphelele	7d (25℃)
Ukuqina	1-2H
Ukunamathela	Ibanga loku-1
Ukumelana nokushaqeka	50kg.cm
Isikhathi sokusebenzisa esihlanganisiwe	4h (25℃)